The Pennsylvania Railroad's class J28 comprised 2 experimental 2-6-2 "Prairie" type steam locomotives.
In 1905, the Pennsylvania Railroad needed a better steam locomotive, than the class E 4-4-2 "Atlantic" type. So, the railroad ordered two 2-6-2s from Alco-Schenectady. They were tested extensively and failed in railroad service. But, they were still on the roster in the late 1920s.
The two J28s had 14.83 inch drivers, a 34.25 inch engine base. They had a Stephenson Valve Gear and weighed 377500 pounds with the tender. They had 27504 pounds of tractive effort. They had 89 square feet (8.3 m2) of firebox space. They had a grate area of 54 square feet (5.0 m2). They could 7000 gallons of water and 13.5 tons of coal. Despite these specifications and more, the J28 was not a powerful enough Pennsylvania Railroad steamer.
| A (0-4-0): | A1 · A2 · A3 · A4 · A5s | B (0-6-0): | B1 (s) · B2 · B3 · B4 · B5 · B6 · B7 · B8 · B1 (e) | C (0-8-0): | C1 · C29 · C30 · C31 |
|---|---|---|---|---|---|
| D (4-4-0): | D1 · D2 · D3 · D4 · D5 · D6 · D7 · D8 · D9 · D10 · D11 · D12 · D13 · D14 · D15 · D16 · D21 · D22 · D23 · D24 · D25 · D26 · D30 · D31 · D32 · D33 · D34 · D35 · D36 · D37 · D38 · D39 · D61 · "Odd D" #10003 | ||||
| E (4-4-2): | E1 · E2 · E3 · E4 · E5 · E6 · E7 · E21 · E22 · E23 · E28 | ||||
| F (2-6-0): | F1 · F2 · F3 · F21 · F22 · F23 · F24 · F25 · F26 · F27 · F30 · F31 · F61 | ||||
| G (4-6-0): | G1 · G2 · G3 · G4 · G5 · G53 | H (2-8-0): | H1 · H2 · H3 · H4 · H5 · H6 · H8 · H9 · H10 | I (2-10-0): | I1s |
| J (2-6-2 and 2-10-4): | J1 · J28 | K (4-6-2): | K1 · K2 · K3s · K4s · K5 | L (2-8-2): | L1s · L2s · L5 · L6 |
| M (4-8-2): | M1 | N (2-10-2): | N1s · N2s | O (4-4-4): | O1 |
| P (4-6-4): | P5 | Q (4-6-4-4 and 4-4-6-4): | Q1 · Q2 | R (4-8-4): | R1 |
| S (6-4-4-6 and 6-8-6): | S1 · S2 | T (4-4-4-4): | T1 | ||
| Articulated steam locomotives: | CC1s · CC2s · HC1s · HH1s · HH2s | Articulated electric locomotives: | AA1 · BB1 · BB2 · BB3 · DD1 · DD2 · FF1 · FF2 · GG1 | Non-standard: | E2b · E2c · E3b · E44 |